SSB02 Sjöström Super Buffer Built
kr312.50
Tax included
Delivery normally within 24 hours plus the shipping time.
This is a so called diamond buffer with the gain of 1. The Sjöström Super Buffer can be used in any hifi equipment. People have used them in CD player tweaks, pre-amps etc. The pcb has two layers and parts on the top side. All pads have a layer of pure 24 carat of gold. This is a populated pcb but is also available as an unpopulated pcb, see HERE
Two boards are required for stereo.
Info HERE
Security policy
Delivery policy
Return policy
Two boards are required for stereo.
Interesting features:
- The pcb fits virtually any SOT23 small signal transistor and almost any SOT223 power transistor.
- The emitter loads have cascodes in order to increase linearity.
- Bias network using red LED's.
- SMD caps, including electrolytic caps.
- SMD parts which makes the buffer very small and thin.
- Input LP-filter if you have problems with RF interference, if not just omit it.
- Crossover distortion reducer for the opamp. This is a popular circuit in the DIY community.
- Useful for anything as long as power supply voltage is within limits and load not to heavy.
- Professional pcb with groundplane which establish good cooling and shielding.
Data sheet
- Height
- 10 mm, 0.4"
- Width
- 50.00 mm, 1.9675"
- Depth
- 35.2 mm, 1.383"
- Weight
- 7.3 g
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
8 other products in the same category:
This is a so called diamond buffer with the gain of 1. The Sjöström Super Buffer can be used in any hifi equipment. People have used them in CD player tweaks, pre-amps etc. The pcb has two layers and parts on the top side. All pads have a layer of pure 24 carat of gold. This is a populated pcb but is also available as an unpopulated pcb, see HERE
Two boards are required for stereo.
Info HERE