SSB01 Sjöström Super Buffer Built
kr937.50
Tax included
Delivery time can vary but will be informed.
A so called diamond buffer with the gain of 1. The Sjöström Super Buffer can be used in any hifi equipment. People have used them in CD player tweaks, pre-amps etc. The pcb has four layers and parts on both sides. The solder mask is black with yellow print. All pads have a layer of pure gold.
Two boards are required for stereo.
Info here
Security policy
Delivery policy
Return policy
Two boards are required for stereo.
Interesting features:
- The pcb fits virtually any SOT23 small signal transistor and almost any SOT223 power transistor.
- The emitter loads have cascodes in order to increase linearity.
- SMD caps, including electrolytic caps.
- SMD parts which makes the buffer very small and thin.
- Input LP-filter if you have problems with RF interference, if not just omit it.
- Crossover distortion reducer for the opamp. This is a popular circuit in the DIY community.
- Useful for anything as long as power supply voltage is within limits and load not to heavy.
- Professional pcb with groundplane which establish good cooling and shielding.
Data sheet
- Height
- 10 mm, 0.4"
- Width
- 32.0 mm, 1.261"
- Depth
- 21.7 mm, 0.852"
- Weight
- 5 g
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
8 other products in the same category:
A so called diamond buffer with the gain of 1. The Sjöström Super Buffer can be used in any hifi equipment. People have used them in CD player tweaks, pre-amps etc. The pcb has four layers and parts on both sides. The solder mask is black with yellow print. All pads have a layer of pure gold.
Two boards are required for stereo.
Info here