UBC01 Unbalanced to balanced driver
  • UBC01 Unbalanced to balanced driver
  • UBC01 Unbalanced to balanced driver
  • UBC01 Unbalanced to balanced driver

UBC01 Unbalanced to balanced driver

SEK 80.00
Tax included Delivery normally within 24 hours plus the shipping time.

A DRV134 based converter for unbalanced signals to balanced. It's also a driver with good driving capability. The pcb has two layers and gold pads. It's an unpopulated pcb.

The DRV134 for the pcb can be bought, see below at accessories.

Info here

Delivery normally within 24 hours. If it's longer a message will be sent.

Last time this product was added to a cart: 03/28/2021


Security policy


Delivery policy


Return policy

UBC01 is a converter for an unbalanced signal to balanced. The major function is established by a DRV134/135. This design is very well suited for connecting two power amplifiers in bridge mode.

Interesting features

  1. 2-layer pcb with 35 um copper.
  2. Gold pads.
  3. Extremely low distortion.
  4. High common mode output impedance.
  5. Low and adjustable differential mode output impedance.
  6. Option for DIL08 or SO08 DRV134/135 .
  7. Several types of input coupling capacitors, high performance RIFA PHE426 polypropylene or 5 mm/ 0.2" caps such as polyester or other types with the same footprint, or some other type with pin spacing from 15 to 27.5 mm.
  8. On-board regulators of LM317/337 type
  9. Discrete regulators for using higher voltage than the max supply voltage of the LM317/337.

Data sheet

27 mm, 1.06"
71.2 mm, 2.8"
58 mm, 2.285"
18 g
Comments (0)
No customer reviews for the moment.