QRV08 Headphone Amplifier SMD current feedback amplifier
kr400.00
Tax included
Delivery normally within 24 hours plus the shipping time.
A headphone amplifier for ultra high demands. The pcb has two layers and gold pads (see the detail pictures). It's an unpopulated pcb.
The design has current feedback and as a result an ultra high speed and an extremely low distorsion.
Measurements by jmd01 and Neurochrome (thanks Tom, tomchr)
Info here
Security policy
Delivery policy
Return policy
Interesting features:
- High speed, low distortion current feedback design.
- All discrete design of the amp itself.
- Offset trim with a trimpot and/or with a DC servo.
- Input LP-filter if you have problems with RF interference (you should have a filter though).
- Room for DC removal cap (if you need this)
- High speed and high performance SMD buffer as output stage.
- High current transistors as output stage.
- Extremely high quality dual mono power supply with large smoothing caps and transformers on the pcb and with four extremely high speed and high performing super regulators.
- Fits any headphone (except for electrostatic of course).
- Any bad feature? Possibly that this project requires skills more than usual in order to succeed. The skills are about soldering the parts in the right place. If you'll manage that, this isn't so hard after all. Building time 4-6 hours only.
Data sheet
- Height
- 26 mm, 1.03"
- Width
- 123.2 mm, 4.85"
- Depth
- 203.2 mm, 8.0"
- Weight
- 82 g
Comments (0)
No customer reviews for the moment.
3 other products in the same category:
A headphone amplifier for ultra high demands. The pcb has two layers and gold pads (see the detail pictures). It's an unpopulated pcb.
The design has current feedback and as a result an ultra high speed and an extremely low distorsion.
Measurements by jmd01 and Neurochrome (thanks Tom, tomchr)
Info here