QRV08 Headphone Amplifier

VAT included

A headphone amplifier for ultra high demands. The pcb has two layers. It's an unpopulated pcb.

Info here



Security policy (edit with Customer reassurance module)


Delivery policy (edit with Customer reassurance module)


Return policy (edit with Customer reassurance module)


Interesting features:

  1. High speed, low distortion current feedback design.
  2. All discrete design of the amp itself.
  3. Offset trim with a trimpot and/or with a DC servo.
  4. Input LP-filter if you have problems with RF interference (you should have a filter though).
  5. Room for DC removal cap (if you need this)
  6. High speed and high performance SMD buffer as output stage.
  7. High current transistors as output stage.
  8. Extremely high quality dual mono power supply with large smoothing caps and transformers on the pcb and with four extremely high speed and high performing super regulators.
  9. Fits any headphone (except for electrostatic of course).
  10. Any bad feature? Possibly that this project requires skills more than usual in order to succeed. The skills are about soldering the parts in the right place. If you'll manage that, this isn't so hard after all. Building time 4-6 hours only.

Data sheet

25.4 mm, 1"
123.2 mm, 4.85"
203.2 mm, 8.0"
82 g