SSR02 Sjöström Super Regulator Built
Ultra high performance regulator, negative output voltages. The pcb has four layers and gold pads. It's a built unit. Delivery time 1-3 weeks. The regulator is hand soldered by Per-Anders Sjöström, shop owner.
Security policy: See link at the bottom of this page.
Delivery policy: See link at the bottom of the page.
Return policy: See link at the bottom of this page.
If it says "In stock" with a orange background it means that I will build on order. Green background means that I have it in stock.
- 4-layer pcb with 70 um (2 oz.) copper.
- Power traces 140 um!
- Gold pads.
- Extremely low noise.
- Extremely low output impedance in the audioband.
- Small size.
- Easy to change voltage, also to negative voltage but this particular design (pcb) requires two different pcb's, one for positive voltages and one for negative.
- Well-known and well-tested in serious and demanding applications.
- Option for TO92 or SOT23 transistors for the small signal transistors.
- Option for DIL08 or SO08 opamp.
- LM431 (and similar) reference or devices like LM329. The pcb has a universal footprint.
- Trimming options for both the reference and the feedback. Room for extra resistors and trimpots.
- One output with sense inputs.
- All resistors 10 mm so it is possible to use a cut and bending machine for those parts.
Option for using higher voltage than the max supply voltage for the opamp.
- 22.1 mm, 0.835 "
- 66.1 mm, 2.6"
- 38.1 mm, 1.5 "
- 23 g