QRV08 Headphone Amplifier

New product

A headphone amplifier for ultra high demands. The pcb has two layers. It's an unpopulated pcb.

Info here

More details

By buying this product you can collect up to 40 loyalty points. Your cart will total 40 loyalty points that can be converted into a voucher of 12,00 SEK.


400,00 SEK tax incl.

Add to wishlist

Data sheet

Height 25.4 mm, 1"
Width 123.2 mm, 4.85"
Depth 203.2 mm, 8.0"
Weight 82 g

More info

Interesting features:

  1. High speed, low distortion current feedback design.
  2. All discrete design of the amp itself.
  3. Offset trim with a trimpot and/or with a DC servo.
  4. Input LP-filter if you have problems with RF interference (you should have a filter though).
  5. Room for DC removal cap (if you need this)
  6. High speed and high performance SMD buffer as output stage.
  7. High current transistors as output stage.
  8. Extremely high quality dual mono power supply with large smoothing caps and transformers on the pcb and with four extremely high speed and high performing super regulators.
  9. Fits any headphone (except for electrostatic of course).
  10. Any bad feature? Possibly that this project requires skills more than usual in order to succeed. The skills are about soldering the parts in the right place. If you'll manage that, this isn't so hard after all. Building time 4-6 hours only.

Reviews

No customer reviews for the moment.

Write a review

QRV08 Headphone Amplifier

QRV08 Headphone Amplifier

A headphone amplifier for ultra high demands. The pcb has two layers. It's an unpopulated pcb.

Info here

QRV08 Headphone Amplifier <h2>Interesting features:</h2> <ol><li>High speed, low distortion current feedback design.</li> <li>All discrete design of the amp itself.</li> <li>Offset trim with a trimpot and/or with a DC servo.</li> <li>Input LP-filter if you have problems with RF interference (you should have a filter though).</li> <li>Room for DC removal cap (if you need this)</li> <li>High speed and high performance SMD buffer as output stage.</li> <li>High current transistors as output stage.</li> <li>Extremely high quality dual mono power supply with large smoothing caps and transformers on the pcb and with four extremely high speed and high performing super regulators.</li> <li>Fits any headphone (except for electrostatic of course).</li> <li>Any bad feature? Possibly that this project requires skills more than usual in order to succeed. The skills are about soldering the parts in the right place. If you'll manage that, this isn't so hard after all. Building time 4-6 hours only.</li> </ol>
320,00 SEK